top of page

Key Components Of A Hydraulic Press Brake

Hydraulic Press Brake Manufacturer In Rajkot, Gujarat, India.

"Key Components Of A Hydraulic Press Brake"


1. Frame

  • The Bed Provides Support For The Material Being Bent, While The Frame Holds The Ram And Other Components Of The Press Brake In Place.

  • The Main Structural Component That Supports The Entire Press Brake.

  • Typically Made Of Steel To Withstand High Pressure And Force.


2. Hydraulic System

  • The Hydraulic System Generates The Force Needed To Bend The Material. It Consists Of A Hydraulic Pump, Hydraulic Cylinders, Valves, And Other Components That Control The Pressure And Flow Of Hydraulic Fluid.

  • Hydraulic Cylinders: Located On Both Sides, They Generate The Pressing Force.

  • Hydraulic Pump: Supplies Hydraulic Fluid To The Cylinders.

  • Valves: Control Fluid Flow, Pressure, And Movement.

  • Oil Reservoir: Stores Hydraulic Fluid And Helps With Cooling.


3. Ram (Upper Beam)

  • The Ram Is The Moving Part Of The Press Brake That Applies Force To The Material. It Is Controlled By The Hydraulic System And Moves Up And Down To Perform The Bending Operation.

  • Moves Vertically To Press The Punch Into The Die.

  • Controlled By Hydraulic Cylinders For Precision Bending.


4. Punch And Die

  • The Die Is A Specialized Tool Attached To The Bed Of The Press Brake That Helps Shape The Material During The Bending Process.

  • Punch: The Upper Tool That Applies Force To Bend The Metal.

  • Die: The Lower Tool That Supports The Metal And Determines The Bend Angle.

  • Various Punch And Die Shapes Exist For Different Bending Operations.


5. Back Gauge

  • The Back Gauge Is A Feature That Helps Position The Material Accurately For Each Bending Operation. It Can Be Manually Adjusted Or Controlled Automatically In Modern CNC Press Brakes.

  • A Precision Positioning System That Ensures Accurate And Repeatable Bends.

  • Can Be CNC-controlled For Complex Bending Sequences.


6. Worktable (Bed)

  • Supports The Metal Sheet During Bending.

  • Holds The Die Securely In Place.


7. Controller

  • In Modern Press Brakes, The Control System Can Be Manual, Semi-automatic, Or Fully Automatic (CNC). It Allows Operators To Set Bending Parameters, Control The Bending Sequence, And Monitor The Bending Process.

  • Used In Modern Hydraulic Press Brakes For Automated Control.

  • Allows Programming Of Bending Sequences, Angles, And Positioning.


8. Safety Devices

  • Hydraulic Press Brakes Are Equipped With Safety Features Such As Guards, Light Curtains, And Emergency Stop Buttons To Ensure The Safety Of Operators During Operation.

  • Light Curtains & Safety Guards: Prevent Accidents By Stopping Operation If An Obstruction Is Detected.

  • Emergency Stop Button: Instantly Stops Machine Operation For Safety.


These Are The "Key Components" Of A Hydraulic Press Brake That Work Together To Bend Sheet Metal And Plate Material Accurately And Efficiently.


For More Details Visit Our Hydraulic Press Brake Machine Page


Comments


bottom of page